Flexilab
Ultra-modular test bench
This ultra-modular device measures and controls the functions of the watch movement.
The modules added to the table are independent and configurable. They can be used to perform all ageing tests based on the rotation, traction or pressure of a component.
The Flexilab is a system that can be upgraded according to the customer's needs. There are numerous possibilities, such as adding rotary bases, static torque transducers, Barilab or Straplab modules, etc.
A special software interface enables all torque-related production measurements and controls to be carried out.
Module integration
-
Tension-pressure module
-
Rotation module
-
Integral rotation and traction-pressure module
-
Traction-torsion module: Straplab
-
Barilab module: barrel control and measurement
Extensions and tooling available
-
Rotary base
-
Linear Y positioning axis
-
Rotary torque sensor
-
Universal barrel gripper
-
Precision concentric movement holder
-
Working crown and self-centring tool
etc
Technical specifications
20N linear axis
Linear positioning accuracy: ± 10 µm
Linear positioning resolution: 1 µm
Stroke: 30 mm
Nominal force: 20 N
Peak force: 40 N
Peak force: 60 N
Accuracy: ± 0.5 N
Sampling: 0.002 sec
Angular positioning: ± 0.5
40N linear axis
Linear positioning accuracy: ± 2 μm
Linear positioning resolution: 100 nm
Stroke: 80 mm
Nominal force: 40 N
Maximum force: 80 N
Peak force: 114 N
Force measurement: 1N
Sampling: 0.002 sec
Angular positioning: ± 10
Static torque sensors available
Nominal Accuracy
(permissible work) (0.01%)
5 mNm ± 5 µNm
10 mNm ± 10 µNm
20 mNm ± 20 µNm
50 mNm ± 50 µNm
Rotary shafts
Motor characterisation
Measurement of applied torque at ±10% of the motor's rated torque
Available nominal torques (maximum working torques):
- 3 mNm (±0.3mNm)
- 10 mNm (±1mNm)
- 23 mNm (±2.3mNm)
- 30 mNm (±3mNm)
- 800 mNm (±80mNm)
Other torques available on request.
Force transducers available
Nominal Accuracy
(permissible work)
1 N ± 0.5 mN
5 N ± 2.5 mN
10 N ± 5.0 mN
50 N ± 10.0 mN
Dynamic torque sensor available
Nominal Accuracy
(permissible work) (0.005%)
100 mNm ± 50 µNm